You’d be forgiven for wondering what all these new terms are, but read on and you’ll not only learn what they mean, you’ll become a Raspberry Pi genius in the process!

Identify your Raspberry Pi hardware

With a range of Raspberry Pi computers to choose from, the first step to becoming a Raspberry Pi genius is to understand the differences between each model, as each has its own strengths depending on your project. You should identify your model of Raspberry Pi before checking for help and advice.

If you want to know the precise version and revision of your Raspberry Pi, check the printed text on the board.

See the Raspberry Pi product page for more information on each version sold.

Fix Raspberry Pi boot problems

This is one of the most frequently asked questions! If your Raspberry Pi refuses to boot, there are a couple of things to try.

First the good news. Your new Raspberry Pi is almost certainly not broken. Every Raspberry Pi is tested before it leaves the factory, so you can be confident that your Raspberry Pi has booted successfully at least once. While it is technically possible that your Raspberry Pi has a hardware fault, the chances are extremely slim. It’s almost certainly a problem you can fix. Try these things in order:

You might be booting but not getting video output. First, check that your cables are connected properly. Take them all out and reconnect them. Try a different HDMI cable if you have one.

Try a different power supply. It’s best to use an official power supply if you are in doubt – see Power Supply & Cables on Raspberry Pi’s product page.

Take out the microSD card and use Raspberry Pi Imager to flash a new installation of Raspberry Pi OS to it (see magpi.cc/imager).

Try a different microSD card. Make sure your SD card is fit-for-purpose, and not a fake. Some SD cards are unsuitable; if your card fails, it may be a good idea to try a different type. Get your microSD cards from a trusted source like The Pi Hut.

Raspberry Pi has full instructions for setting up your Raspberry Pi, but if it still will  not boot, you will find a great post packed with advice on Raspberry Pi’s forum.

Understand LED warning flash codes

Every Raspberry Pi has LED lights on the board. The LED lights are a visual indicator of what Raspberry Pi is doing. The on-board red LED indicates that your Raspberry Pi is on, signifying power (PWR). This will flash if the voltage drops too low too, so check your power supply if this happens.

The on-board green LED, labelled ACT, indicates microSD card activity and flashes during a read or write, but on Raspberry Pi Zero this indicates power and usually flashes a lot during boot. There are LED lights within the Ethernet ports too – the green LNK LED will be on when an Ethernet cable is connected, and flashing indicates network activity. The 100/1000 LED will be yellow if gigabit networking is working, otherwise it will be off.

If Raspberry Pi fails to boot, in many cases an LED will be flashed a specific number of times to indicate what happened. Usually, the pattern will repeat after a two-second gap. See this page for more info.

This is just a few of the things you can learn in the latest issue to help you become a Raspberry Pi Genius. Download The MagPi #107 and head to page 32 for much more.